UNSEALED 4X4 GARAGE: DIY SERIES

By Unsealed 4X4 2 Min Read

CLICK HERE TO READ THIS STORY IN OUR ONLINE MAGAZINE

LIGHT THE WAY… NOT THE SKY

Advertisement

Ben from Drivetech 4×4 shows us how to install  driving lights and an LED light bar.

 

Last month we showed you how to install suspension into an IFS 4X4 – a very important modification. An equally important modification is the fitment of driving lights; think LED light bars and driving lights. Now, we didn’t want to get too deep into the wiring side of things… as you will either already know how to do that job, or you’ll pay an auto electrician to do it for you. But something that everyone who owns driving lights will have to do at some stage is adjust them so one light isn’t hunting for aliens while the other puts burn marks into the ground. The good news, is while it might seem like a pain in the butt, Ben from Drivetech 4×4 has some really straightforward advice on how to mount and get the most from your driving lights. Note: This might require a trip to your local hardware store. But you will have to watch the video to find out why.  


TAGGED:
Share This Article
Leave a comment